Electric TeSys Schneider D LC1D Contactor, 24 V dc Coil, 3-Pole, 95 A, 45 kW, 3NO, 1 kV ac – LC1D95BD

Schneider Electric LC1D TeSys D ContactorsTeSys D Contactors from Schneider Electric combine long mechanical and electrical life to offer a high reliable contactor. The range has been designed for integration in control systems and can be used to create motor starters for any type of application. The TeSys D contactors offer quick simple setup while maintaining compliance with international standards.Features and Benefits
• Built-in auxiliary contacts for added switching capability
• Screw
connections: IP20 finger-safe terminals with both North American and International terminal markings
• Can be panel mounted with screws or DIN Rail mounted
• Bidirectional peak limiting diode suppressor to protect the coil
• Easily installed accessories
• Flexible control circuit to suit a wide range of applicationsWhat does the utilisation category AC1 and AC3 mean for the TeSys contactors?Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions. AC-
1: This applies to all AC devices with a power factor of at least 0.95. Example of
use: resistive load, heating, distribution.AC-
3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of
use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.What accessories are available?
• Auxiliary contact blocks with serrated wiping action
• Front mount dust tight auxiliary contact blocks
• Pneumatic time delay blocks
• Transient voltage surge suppressors
• Interface modules and electronic timers
• Mechanical latching blocksIs the TeSys D range a double break pole type contactor?Yes the Tesys D range uses linear translation movement that provides double breaking of the poles.Schneider Electric LC1D95BDTeSys Deca contactor, 3 poles (3NO), for motor control applications up to 95A/1000V AC-3/AC-3e (45kW@400V). They can be used to create motor starters for almost any type of application. It provides a 24V DC coil, 1NO+1NC built-in auxiliary contacts, power connections by screw terminals and control by screw clamp terminals. For operating rates until 3600 cycles/hour and environments until 60°C, it procures high reliability and durability. Compact (85mm width), DIN-rail mounting or screw fixing. Contactor is rated for 25HP at 200 to 208VAC, 30HP at 240VAC, 60HP at 480VAC and 60HP at 600VAC three phase. Multi standards certified (IEC, CCC, EAC, Marine), Green Premium compliant (RoHS/REACh). Contactor is supplied with a 24 VDC coil with transient suppressor module. Contactor has one normally open and one normally closed auxiliary contact built-in as standard. The NC contact is mirror certified. Screw clamp terminals are used for load and auxiliary connections. An extensive line of accessories makes it easy to meet the requirements of most applications. The contactor is 5.00 inches tall, 3.35 inches wide and 7.32 inches deep. It weighs 5.75 lbs. Contactor is certified to UL, CSA, IEC, CCC, EAC and Marine standards. Contactor also meets the requirements of RoHS/REACh making it a Green Premium product.
• IP20-rated front face is touch-proof for safe handling during installation and maintenance
• Wide operating temperature range of -5°C to +60°C for use in extreme conditions
• Screw terminals streamline installation and hold fast against vibration
• Mounting clamps make it a snap to install the contactor onto a DIN rail or plateApplications
• Manufacturing facilities
• Energy production industry
• Automotive systemsWhat does NO mean?NO stands for ‘normally open’, which in the case of contactors means your system is off until you turn it on. These components are suitable for equipment that needs operator supervision, like construction equipment.