Pepperl + Fuchs

The Pepperl + Fuchs Triangulation sensor has a high degree of protection IP69K. The optical sensors in the series are the first devices to offer an end-to-end solution in a medium-sized standard design from the thru-beam sensor through to the measuring distance sensor.

AS-I Actuator/Sensor DIN Rail Modules

22. 5mm width housing
Removable terminals
Available with a variety of inputs/outputs

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC.

Accessories

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC. A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time.

Varikont Inductive Proximity Sensors – Limit Switch Style

These Varikont sensors have an extraordinary reliability and robustness under extreme conditions and their advanced technology guarantees an almost unlimited range of applications. The four-corner power and output status LEDs enable 360º visibility so that the operating and switching states can be monitored from every angle.

The Pepperl + Fuchs Inductive analog output sensors are used to detect metal objects within specific operating ranges. This object distance is then translated into an analog output signal proportional to distance, making these sensors ideally suited for measuring and control applications.

AS-I Pneumatic Module

4 inputs /2 pneumatic outputs
Protection degree IP65
Flat or round cable connection (via EMS base, not included)
Cable piercing method for flat cable
Inputs for 2- and 3-wire sensors
Function display for bus, inputs and outputs
Direct connection of pneumatic cylinders

Actuator Sensor Interface (AS-I)

Actuator Sensor Interface, AS-I

AS-I is a method of providing communication from simple discrete components such as an inductive sensor or switching valve via a simple two-wire network to a controlling device such as a PLC or PC. A unique feature of the AS-I system is the flat, two-core cable (stock no 242-6189) designed to enable fast and easy connection, ensuring correct polarity every time.

Small Block Style

LED status display
PBT sensing face and housing material except for stock no. 257-2298 which has a PMMA sensing face and housing
Short circuit protection pulsing, and reverse polarity protection
Prewired 2m of 3 core PVC cable apart from stock no.

M30 Single & Dual Switch

Pepperl and Fuchs M30 single and dual switches. Stainless steel body
Adjustable switched outputs
Synchronisation feature
Hysteresis and window modes
Adjustable acoustic power and sensitivity
For detecting smooth substances solids, liquids or powders
Switching current of 200mA and no load current of 50mA
Compatible lead type M12 5-pin Plug-In

UB and UC Series Barrel Style Switched Output

IP65 protected
-25 to +70°C Operating temperature
Teach-In input
Temperature compensation
Short circuit/Overload protected
LED indicators
Supply voltage 10-30Vdc
N/O and N/C configurable output.

3 mm non-flush
Increased operating distance
Extended temperature range -40. +85 °C.

The Pepperl + Fuchs Mounting bracket which can be used for series MLV12 sensors. The material used is nickel-plated steel.

The Pepperl + Fuchs Mounting flange designed for simple installation. The mounting head and foot can be independently rotated through 360° for flexible positioning and easy setup.

Retro-Reflective

Adjustable sensitivity
Optimal price/power ratio
Dark-ON operation
Powerful push-pull output
Protection to IP65
Response time 1ms
Operating temperature range –25 → +60°C
Dimensions 88 x 54. 3 x 25.