The Rockwell Automation bulletin 154 starting torque controller (STC) is fully solid state, it does not come equipped with a bypass, and one is not required. The controller is designed to run on full load motor current.
The Rockwell Automation bulletin 154 starting torque controller (STC) is fully solid state, it does not come equipped with a bypass, and one is not required. The controller is designed to run on full load motor current. It is designed to reduce system shock that is typically seen when directly starting on line voltage. The STC is rated for 240V AC single-phase motor up to 25 A
Fully solid-state
Operating Temperature -40°C to 60 °C
The Schneider Electric TeSys enclosed starter with contactor, 3 poles, Ithe 35A 690V, for non-reversing motor applications 15kW@400V AC-3. Polycarbonate enclosure providing IP65 / IK07 protection, equipped with a green pushbutton Start (I) and a red pushbutton Stop/Reset (O).
ABB Motor Protection Circuit Breaker, 6kV Impulse Withstand Voltage, 10A Current Rating – MS116-10
Use this MPCB from ABB to safeguard your industrial equipment from damage caused by short circuits and overload conditions. A 3-pole configuration means it can control up to 3 circuits at the same time for enhanced efficiency.
Schneider Electric ATV320U40N4C
This Altivar 320 variable speed drive can feed 3-phase synchronous and asynchronous motors. Its compact form factor allows vertical stacking of drives inside machine frames.
Select at least 2 products
to compare
There are no reviews yet.