V ac Schneider Electric TeSys K LP1K Contactor, 24 V dc Coil, 3-Pole, 6 A, 3 kW, 3NO, 690 LP1K06013BD

Schneider Electric TeSys K LP1K Contactors.Schneider Electric TeSys K provide you with a choice of reversing and non-reversing contactors. TeSys K contactors, unlike relays, are specifically designed to connect to high current load devices. Used in larger-scale applications, Schneider Electric contactors can be controlled remotely, specifically designed to switch a large amount of electrical power through its contacts.The contractors feature varied switching voltages, many of the range feature screw clamp or a solder termination. TeSys K contactors offer you the best performance and compactness ratio plus also ensuring easy integration in all applications.Highly reliableExcellent qualityEasily installed accessoriesContactor Features.Common options available for all
ratings: 6, 9, 12 AControl circuits
available: AC, DC, low-consumption DC,
silentApplications: 2.2 kW, 4.5 kW, 5.5 kW in AC3 and
AC4Connectors: screw clamp, faston connectors, spring terminals, pins for printed circuit boardsControl Relay Features.4 pole relays with 10A thermally rated contacts suitable for AC or DC control voltages. Low consumption coil versions with built in suppression and suitable to be used with programmable controllers are also available.Contacts with 10A thermal rating, suitable for use down to 17V 5mAFour-pole for operation with AC or DC control circuits Variety of auxiliary contacts, and timer modules Clamp terminals as standard with spring terminal, printed circuit board connection and fast-on connector types availableApplications.Industry, infrastructure, building.Simple control systems.Noise sensitive areas, disturbed mains supply, silent contactor.Compatible with programmable controller outputs, low consumption contactor.Switching contactor or relay coils.Powering control and signalling equipment.What does the utilisation category AC1 and AC3 mean for the TeSys contactors?Contactor utilisation categories define the current making and breaking values, based on the type of load to be controlled and the operating cycle conditions.AC-
1: This applies to all AC devices with a power factor of at least 0.95. Example of
use: resistive load, heating, distribution.AC-
3: This applies to squirrel cage motors where breaking occurs while the motor is running. Example of
use: all squirrel cage motors, lifts, escalators, conveyors, bucket elevators, compressors, pumps, mixers, air conditioning units.What accessories are available?Auxiliary contact blocks with serrated wiping actionFront mount dust tight auxiliary contact blocksPneumatic time delay blocksTransient voltage surge suppressorsInterface modules and electronic timersMechanical latching blocksLP1K06013BD TeSys K LP1K Contactor.Motor control, applications.AC-3, AC-4 Category.[Ue] rated operational voltage 690 V AC 50/60 Hz for power circuit <= 690 V AC 50/60 Hz for signalling circuit [Ie] rated operational current 6 A at <= 440 V AC AC-3 for power circuit.Control circuit 24 V dc, standard.1 NC Auxiliary contact.Category III.Rated breaking capacity, 110 A at 415 V conforming to IEC 60947, 110 A at 440 V conforming to IEC 60947, 80 A at 500 V conforming to IEC 60947, 110 A at 220...230 V conforming to IEC 60947, 110 A at 380...400 V conforming to IEC 60947, 70 A at 660...690 V conforming to IEC 60947.Flame resistant V1 conforming to UL 94, Requirement 2 conforming to NF F 16-101, Requirement 2 conforming to NF F 16-102.Safety level B10d = 1369863 cycles contactor with nominal load conforming- to EN/ISO 13849-1, B10d = 20000000 cycles contactor with mechanical load conforming- to EN/ISO 13849-1.Plate, Rail Mounting.Spring terminals.Protection to IP2x conforming to VDE 0106ApprovalsUL, CSA.StandardsBS 5424, IEC 60947, NF C 63-110, VDE 0660.