سيمنز SIMATIC S7-300 في العراق | النجاح باور

وحدات PLC من Siemens SIMATIC S7-300: وحدات إدخال وإخراج رقمية وتماثلية (SM 321 و322 و331 و332)، ومعالجات اتصال وملحقات، لصيانة أنظمة S7-300 القائمة وتوسعتها.

توفّر النجاح باور منتجات سيمنز هذه من أربيل للعملاء في بغداد وجميع أنحاء العراق. أرسل لنا أرقام القطع التي تحتاجها لمعرفة الأسعار ومدة التوريد.

SIMATIC S7-300, CP 341 Communications processor with RS422/485 interface incl. configuration package on CD

SIE-6ES7341-1CH02-0AE0-NWB

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit, Single rooting (60 V COM.), 4-channel operation: 10 ms, 8-channel operation: 23-95ms, 1x 40-pole

SIE-6ES7331-7NF10-0AB0-NSS

SIMATIC S7-300, Analog input SM 331, Isolated 8 AI, resolution 13 bits U/I/resistor/Pt100, NI100, NI1000, LG-NI1000, PTC/KTY, 66 ms conversion time; 1x 40-pole

SIE-6ES7331-1KF02-0AB0-NSO

SIMATIC S7-300, Digital output SM 322 High Speed, isolated, 16 DO, 24 V DC, 0.5A, 1x 20-pole

SIE-6ES7322-1BH10-0AA0-NSS

SIMATIC S7-300, CPU 317-2 DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface DP master/slave Micro Memory Card required

SIE-6ES7317-2AK14-0AB0-NWB

SIMATIC S7-300, mounting rail, length: 830 mm

SIE-6ES7390-1AJ30-0AA0-USED

SIMATIC S7-300, Signal module for 3 SSI encoders for reading in the position value with 2 FREEZE inputs, 1x 20-pole Supports isochronous mode

SIE-6ES7338-4BC01-0AB0-USED

Communications processor CP 343-5 for connection of SIMATIC S7-300 to PROFIBUS, FMS, S5-compatible, PG/OP and S7 communication, 12 Mbit/s, Single-width

SIE-6GK7343-5FA01-0XE0-NFO

SIMATIC S7-300, dummy module DM 370, Dummy module Use for module replacement

SIE-6ES7370-0AA01-0AA0-NFO

SIWAREX U WEIGHING ELECTRONICS (TWO-CHANNEL VERSION) * FOR CONNNECTING TWO SCALES * FOR SIMATIC S7-300 AND ET200M * RS232 INTERFACE FOR CONNECT. OF A PC * TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR

SIE-7MH4950-2AA01-NFO

SIMATIC S7-300, mounting rail, length: 482.6 mm

SIE-6ES7390-1AE80-0AA0-UFP

SIMATIC S7-300, FM 354 SUBMODULE FOR POSITIONING WITH SERVOMOTORS, MODULE EXCHANGE W/O PG, PREQUISITE STEP7 V3.1 INCL. CONFIG. PACKAGE ON CD

SIE-6ES7354-1AH01-0AE0-NSS

SIE-6ES7341-1CH02-0AE0-NSS

SIMATIC S7-300, Connecting comb between PS307 and CPUS of 2nd generation (before 2003) spare part

SIE-6ES7390-7BA00-0AA0-NWB

SIMATIC S7-300, Connection IM 360 in central rack for connection of max. 3 expansion racks, with C-bus

SIE-6ES7360-3AA01-0AA0-NWB

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI, resolution 14 bit, 0.052 ms/channel current, Voltage alarm, diagnostics, 1x 20-pole, suitable for isochronous mode Improved bus cycle time for isochronous mode

SIE-6ES7331-7HF01-0AB0-NSO

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 2A, 1x 20-pole

SIE-6ES7322-1BF01-0AA0-NSO

SIMATIC S7-300, Digital input SM 321, isolated, 8 DI, 120 V/230 V AC, 1x 20-pole

SIE-6ES7321-1FF01-0AA0-NSO

SIMATIC S7-300 CPU 315-2 PN/DP, Central processing unit with 384 KB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

SIE-6ES7315-2EH14-0AB0-NSO

SIMATIC S7-300 Outdoor Regulated power supply PS307 input: 120/230 V AC, output: 24 V/5 A DC

SIE-6ES7307-1EA80-0AA0-NSS

SIE-7MH4950-2AA01-USED

communications processor CP 343-1 ERPC for connection of SIMATIC S7-300 CPU to Industrial Ethernet and to various databases functions: TCP/UDP, S7 comm., open communication with a. without RFC1006, multicast, web server, clock time via SIMATIC method or NTP, access protection via IP access list SNMP, DHCP, C-plug, Gigabit interface 1x RJ45 (10/100/1000 Mbit).

SIE-6GK7343-1FX00-0XE0-NSS

Communications processor CP 342-5 for connection of SIMATIC S7-300 to PROFIBUS DP, S5-compatible, PG/OP and S7 communication.

SIE-6GK7342-5DA03-0XE0-USED

SIMATIC S7-300, FM352-5 with PNP output, High Speed Boolean Processor, for high-speed linking, 12 DI, 8 DO, 1 encoder interface for RS422 incr./SSI encoder

SIE-6ES7352-5AH11-0AE0-USED

SIMATIC S7-300, Counter module FM 350-2, 8 channels, 20 kHz, 24 V encoder for counting, frequency measurement, speed measurement, period duration measurement, dosing incl. configuration package and electronic documentation on CD-ROM

SIE-6ES7350-2AH01-0AE0-NWB

SIE-6ES7341-1CH02-0AE0-USED

SIMATIC S7-300, CP 340 Communications processor with 20 mA interface (TTY) incl. configuration package on CD

SIE-6ES7340-1BH02-0AE0-USED

SIMATIC S7-300, Analog output SM 332, isolated by channel, 4 AI, Resolution 16 bit, 0-10 V, 1-5 V, +/-10 V, +/-20 mA, 0/4-20mA, 20-pole, suitable for isochronous mode improved bus cycle times for the isochronous mode

SIE-6ES7332-7ND02-0AB0-USED

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI thermocouples Type B, E, J, K, L, N, R, S, T TXK/TXK (L) according to GOST 16 bit, 50ms, 1x 40-pole

SIE-6ES7331-7PF11-0AB0-USED

SIE-6ES7331-1KF02-0AB0-REFURBISHED

SIMATIC S7-300, Digital module SM 323, isolated, 16 DI and 16 DO, 24 V DC, 0.5 A, Total current 4A, 1x 40-pole

SIE-6ES7323-1BL00-0AA0-NWB

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO (relay), 1x 40-pole, 24 V DC, 120-230 V AC, 5 A with RC filter overvoltage protection

SIE-6ES7322-5HF00-0AB0-USED

SIE-6ES7322-5HF00-0AB0-NWB

SIMATIC S7-300, Digital input SM 321, isolated, 16 DI, 24 V DC, 1x 20-pole

SIE-6ES7321-1BH02-0AA0-NWB

SIMATIC S7-300 CPU 317-2 PN/DP, Central processing unit with 1 MB work memory, 1st interface MPI/DP 12 Mbit/s, 2nd interface Ethernet PROFINET, with 2-port switch, Micro Memory Card required

SIE-6ES7317-2EK14-0AB0-NWB

SIMATIC S7-300, Digital input SM 321, Isolated 32 DI, 24 V DC, 1x 40-pole

SIE-6ES7321-1BL00-0AA0-NWB

SIWAREX U WEIGHING ELECTRONICS (SINGLE CHANNEL VERSION) FOR CONNNECTING ONE SCALE FOR SIMATIC S7-300 AND ET200M RS232 INTERFACE FOR CONNECT. OF A PC TTY INTERFACE FOR REMOTE DISPLAY CONNECTION WITH BUS CONNECTOR

SIE-7MH4950-1AA01-NSS

SINAUT ST7, TIM 4R-IE communications module for SIMATIC S7-300, S7-400, PC; with two RS232/RS485 interfaces for SINAUT Communication via standard WAN networks and two RJ45 interfaces for SINAUT communication via IP-based networks (WAN or LAN).

SIE-6NH7800-4BA00-NSS

SINAUT ST7, TIM 3V-IE communications module for SIMATIC S7-300 with an RS232 interface for SINAUT communication via a classic WAN and an RJ45 interface for SINAUT communication via an IP-based network (WAN or LAN).

SIE-6NH7800-3BA00-NSS

Communications processor CP 343-1 for connection of SIMATIC S7-300 to Industrial Ethernet via ISO and TCP/IP, PROFINET IO controller or PROFINET IO device, integrated 2-port switch ERTEC 200, S7 communication, fetch/write, SEND/RECEIVE RFC1006, multicast, DHCP, NTC- CPU sync, with and without diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s.

SIE-6GK7343-1EX30-0XE0-NSS

Communications processor CP 343-1 Lean for connection of SIMATIC S7-300 to Industrial Ethernet via TCP/IP and UDP, Multicast, SEND/RECEIVE with and without RFC1006, Fetch/ Write, S7 communication (server), PROFINET IO device integrated 2-port switch ERTEC 200, Module replacement without PG, SNMP diagnostics, initialization via LAN, 2x RJ45 connection for LAN with 10/100 Mbit/s

SIE-6GK7343-1CX10-0XE0-NSS

SIMATIC S7-300, cam controller, FM 352, electronic incl. configuration package on CD

SIE-6ES7352-1AH02-0AE0-NSS

SIE-6ES7338-4BC01-0AB0-NSS

SIMATIC S7-300, Analog module SM 334, Non-isolated 4 AI/2 AO, 1x 20-pole, Removing and inserting possible with active backplane bus

SIE-6ES7334-0CE01-0AA0-NSS

SIMATIC S7-300, Analog input SM 331, isolated, 8 AI; +/-5/10V, 1-5 V, +/-20 mA, 0/4 to 20 mA, 16 bit (55ms), Single rooting (50 V COM.), 1x 40-pole

SIE-6ES7331-7NF00-0AB0-NSS

SIMATIC S7-300, Analog input SM 331, isolated, 2 AI, Resolution 9/12/14 bits, U/I/thermocouple/resistor, alarm, diagnostics, 1x 20-pole, Removing/inserting with active backplane bus

SIE-6ES7331-7KB02-0AB0-NSS

SIE-6ES7331-7HF01-0AB0-NSS

SIMATIC S7-300, Digital output SM 322, isolated, 8 DO, 24 V DC, 0.5A (1x 8 DO), Short-circuit protection diagnostics, 1x 20-pole

SIE-6ES7322-8BF00-0AB0-NSS

وحدات PLC من Siemens SIMATIC S7-300: وحدات إدخال وإخراج رقمية وتماثلية (SM 321 و322 و331 و332)، ومعالجات اتصال وملحقات، لصيانة أنظمة S7-300 القائمة وتوسعتها.

توفّر النجاح باور منتجات سيمنز هذه من أربيل للعملاء في بغداد وجميع أنحاء العراق. أرسل لنا أرقام القطع التي تحتاجها لمعرفة الأسعار ومدة التوريد.