
ATH230U06N4
Schneider Electric variable speed drive, Altivar HVAC ATH200, ATH230, 0.55kW, 0.75hp, 380 to 500V, 3 phase, IP20, with EMC filter.
إظهار المواصفات
Main Characteristics
| Range of Product | Altivar HVAC ATH200 |
|---|---|
| Product Specific Application | HVAC |
| Product or Component Type | Variable speed drive |
| Variant | Standard version |
| Product destination | Asynchronous motors; Synchronous motors |
| Mounting Mode | Cabinet mount |
| IP Degree of Protection | IP20 |
| Phase | 3 phase |
| [Us] rated supply voltage | 380...500 V - 15...10 % |
| Relative symmetric mains voltage tolerance | 10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Relative symmetric network frequency tolerance | 5 % |
| Nominal output current | 1.9 A |
| Maximum transient current | 2.1 A |
| Motor power kW | 0.55 kW |
| Maximum Horse Power Rating | 0.75 hp |
| Safety Function | STO (safe torque off) |
| Safety level | SIL 3 IEC 61508; PL = e ISO 13849-1 |
| EMC filter | Class C2 EMC filter integrated |
| Communication port protocol | Modbus serial; BACnet MS/TP |
| Option card | Communication module BACnet IP |
Technical Data
| Apparent power | 1.9 kVA at 500 V |
|---|---|
| Power dissipation in W | 27 W |
| Discrete input number | 7 |
| Discrete input type | STO safe torque off, 24 V DC1.5 kOhm; DI1...DI6 logic inputs, 24 V DC 30 V); DI5 programmable as pulse input 0…30 kHz, 24 V DC 30 V) |
| Discrete input logic | Positive logic (source); Negative logic (sink) |
| [Us] rated supply voltage | 24 V DC |
| Discrete output number | 1 |
| Discrete output type | Open collector DQ+ 0…1 kHz 30 V DC 100 mA; Open collector DQ- 0…1 kHz 30 V DC 100 mA |
| Analogue input number | 3 |
| Analogue input type | AI1 voltage 0...10 V DC 30 kOhm 10 bits; AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits; AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits |
| Analogue output number | 1 |
| Analogue output type | Software-configurable current AQ1 0...20 mA 800 Ohm 10 bits; Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits |
| Relay output number | 2 |
| Relay output type | Configurable relay logic R1A 1 NO 100000 cycles; Configurable relay logic R1B 1 NC 100000 cycles; Configurable relay logic R1C; Configurable relay logic R2A 1 NO 100000 cycles; Configurable relay logic R2C |
| Maximum switching current | Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC; Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC; Relay output R2A, R2C resistive, cos phi = 1 5 A 250 V AC; Relay output R2A, R2C resistive, cos phi = 1 5 A 30 V DC |
| Minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC |
| Physical interface | 2-wire RS 485 |
| Connector Type | RJ45 |
| Method of access | Server Modbus serial; Subordinate BACnet MS/TP |
| Transmission Rate | 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps; 9.6, 19.2, 38.4, 76.8 kbit/s |
| Transmission frame | RTU; MS/TP |
| Number of addresses | 0…247; 0…127 |
| Data format | 8 bits, configurable odd, even or no parity 1or 2 stop |
| Type of polarization | No impedance |
| Line current | 2.8 A 380 V; 12.2 A 500 V |
| Prospective line Isc | 5 kA |
| Output frequency | 0.599 kHz |
| Output voltage | <= power supply voltage |
| Switching frequency | 2...16 kHz adjustable; 4...16 kHz with derating |
| Nominal switching frequency | 4 kHz |
| 4 quadrant operation possible | True |
| Asynchronous motor control profile | Voltage/frequency ratio, 5 points; Flux vector control without sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control without sensor - Energy Saving; Voltage/frequency ratio, 2 points |
| Synchronous motor control profile | Vector control without sensor |
| Acceleration and deceleration ramps | Linear; U; S; CUS; Ramp switching; Acceleration/deceleration ramp adaptation; Acceleration/deceleration automatic stop with DC injection |
| Motor slip compensation | Automatic whatever the load; Adjustable 0...300 %; Not available in voltage/frequency ratio (2 or 5 points) |
| Braking to standstill | By DC injection |
| Brake chopper integrated | True |
| Standards | IEC 61800-5-1; IEC 61800-3; UL 508C; IEC 61800-3 environment 1 category C2; IEC 61800-3 environments 2 category C3; IEC 60721-3; IEC 61508; IEC 13849-1 |
| Product certifications | CULus; CE; UKCA; KC; EAC; ATEX; RCM |
| Marking | CULus; CE; UKCA; KC; EAC; ATEX; RCM |
| With safety function Safe torque off (STO) | True |
| Protection type | Line supply phase loss drive; Motor phase loss motor; Line supply overvoltage and undervoltage drive; Overheating protection drive; Overload motor; With PTC probes motor; Short-circuit between motor phases drive; Overcurrent between output phases and earth drive |
| Width | 4.1 in (105 mm) |
| Height | 5.6 in (142 mm) |
| Depth | 6.2 in (158 mm) |
| Net Weight | 2.6 lb(US) (1.2 kg) |
| Function Available | Fire mode; Run permissive; PID controller; Additional PID; Damper control; Underload detection for broken belt |
Environment & Certifications
| Pollution degree | 2 |
|---|---|
| Operating altitude | <= 3280.84 ft (1000 m) without derating; 3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m |
| Operating position | Vertical +/- 10 degree |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Relative humidity | 5…95 % without condensation or dripping water EN/IEC 60068-2-3 |
| Volume of cooling air | 4755.2 Gal/hr(US) (18 m3/h) |
| Overvoltage category | III |
| Noise level | 51 dB |
| Ambient air transport temperature | -13…158 °F (-25…70 °C) |
| Ambient air temperature for operation | 14…122 °F (-10…50 °C) without derating; 122…140 °F (50…60 °C) with derating factor |
| Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) |
Packaging & Logistics
| Nbr. of units in pkg. | 1 |
|---|---|
| Package 1 Height | 7.087 in (18.000 cm) |
| Package 1 Width | 7.283 in (18.500 cm) |
| Package 1 Length | 7.283 in (18.500 cm) |
| Package weight(Lbs) | 3.697 lb(US) (1.677 kg) |
| Number of Units in Package 2 | 30 |
| Package 2 Height | 29.528 in (75.000 cm) |
| Package 2 Width | 23.622 in (60.000 cm) |
| Package 2 Length | 31.496 in (80.000 cm) |
| Package 2 Weight | 134.482 lb(US) (61.000 kg) |
| GTIN | 3606487882107 |
| Country of origin | ID |
Warranty
| Warranty (in months) | 18 |
|---|
يتناسب جيدًا مع
تسليم موثوق للمنتجات الصناعية في جميع أنحاء العالم.
تجربة خالية من المخاطر لمدة 90 يومًا
ضمان لمدة سنتين
شحن وإرجاع مجانيان

ATH230U06N4
إذا كانت لديك أي أسئلة، فنحن نرحب باتصالك بنا في أي وقت. سنرد عليك في أقرب وقت ممكن، خلال 24 ساعة في أيام الأسبوع.
-
معلومات الشحن
استخدم هذا النص للإجابة على الأسئلة بأكبر قدر ممكن من التفصيل لعملائك.
-
دعم العملاء
استخدم هذا النص للإجابة على الأسئلة بأكبر قدر ممكن من التفصيل لعملائك.
-
الأسئلة الشائعة
استخدم هذا النص للإجابة على الأسئلة بأكبر قدر ممكن من التفصيل لعملائك.
-
اتصل بنا
استخدم هذا النص للإجابة على الأسئلة بأكبر قدر ممكن من التفصيل لعملائك.
الأسئلة الشائعة
يرجى قراءة صفحة الأسئلة الشائعة لمعرفة المزيد.
هل تقومون بتوريد منتجات أصلية؟
نحن نوفر منتجات الأتمتة الصناعية والكهربائية الأصلية من الشركات المصنعة الرائدة بما في ذلك سيمنز (Siemens) وإيه بي بي (ABB) وشنايدر إليكتريك (Schneider Electric) وفينكس كونتاكت (Phoenix Contact) وإيتون (Eaton). أصالة المنتجات وجودتها هي أولويتنا.
هل يمكنني طلب عرض أسعار؟
نعم. إذا لم يتم عرض الأسعار أو كنت بحاجة إلى عناصر متعددة، فما عليك سوى استخدام زر "طلب عرض أسعار" أو الاتصال بفريق المبيعات لدينا للحصول على عرض أسعار مخصص.
هل تشحنون دوليًا؟
نعم. نحن نوفر خدمة الشحن إلى جميع أنحاء العالم، ويمكننا توصيل المنتجات إلى العملاء في جميع أنحاء أوروبا والشرق الأوسط وآسيا ووجهات دولية أخرى.
هل يمكنك توفير قطع غيار قديمة أو يصعب العثور عليها؟
نعم. نحن متخصصون في توريد مكونات الأتمتة الصناعية التي توقف إنتاجها أو عفا عليها الزمن أو يصعب العثور عليها من خلال شبكة الموردين العالمية لدينا.
ما هي الصناعات التي تخدمونها؟
نحن ندعم العملاء في قطاعات الصناعة والنفط والغاز والطاقة والمرافق ومعالجة المياه والبنية التحتية والأتمتة الصناعية.