Schneider Electric ATV21HU30N4 Variable Speed Drive

ATV21HU30N4

السعر عند الطلب نرسل عرض السعر خلال يوم عمل واحد. يتم تأكيد التوفر ومدة التوريد مع عرض السعر.

Schneider Electric Altivar 21 variable speed drive, ATV21, 3kW NAHP, 480V, EMC filter class A, IP20.

إظهار المواصفات

Main Characteristics

Lifecycle statusDiscontinued by the manufacturer
Range of ProductAltivar 21
Product or Component TypeVariable speed drive
Product destinationAsynchronous motors
Product Specific ApplicationPumps and fans in HVAC
Assembly styleWith heat sink
Component nameATV21
EMC filterClass A EMC filter integrated
Power supply voltage380...480 V - 15...10 %
Phase3 phase
Motor power kW3 kW
Line current4.9 A 480 V; 6.2 A 380 V
Speed range1…10
Transient overtorque120 % of nominal motor torque +/- 10 % 60 s
Asynchronous motor control profileEnergy saving ratio; Constant voltage/frequency ratio; Quadratic voltage/frequency ratio; Constant voltage/frequency ratio with automatic IR compensation; Current flux vector control (FVC) without speed feedback
Communication Port ProtocolModbus
Type of polarizationNo impedance
IP degree of protectionIP20 on upper part without blanking plate on cover EN/IEC 60529; IP20 on upper part without blanking plate on cover EN/IEC 61800-5-1; IP21 EN/IEC 60529; IP21 EN/IEC 61800-5-1; IP41 on upper part EN/IEC 60529; IP41 on upper part EN/IEC 61800-5-1
Option cardCommunication card APOGEE FLN; Communication card BACnet; Communication card LonWorks; Communication card METASYS N2

Technical Data

Power supply voltage limits323…528 V
Power supply frequency50...60 Hz - 5...5 %
Power supply frequency limits47.5…63 Hz
Apparent power5.5 kVA 380 V
Maximum prospective line Isc5 kA
Maximum continuous output current7.2 A 380 V; 7.2 A 460 V
Maximum transient current7.9 A 60 s
Speed drive output frequency0.5…200 Hz
Nominal switching frequency12 kHz
Switching frequency12...16 kHz with derating factor; 6...16 kHz adjustable
Speed accuracy+/- 10 % of nominal slip 0.2 Tn to Tn
Torque accuracy+/- 15 %
Regulation loopAdjustable PI regulator
Motor slip compensationAdjustable; Automatic whatever the load; Not available in voltage/frequency ratio motor control
Diagnostic1 LED (red) for DC bus energized
Output voltage<= power supply voltage
InsulationElectrical between power and control
Recommended type of cable for mounting in an enclosureWith UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC; Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC; Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR
Electrical connectionL1/R, L2/S, L3/T terminal 0.009 in² (6 mm²) / 10 AWG; VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.004 in² (2.5 mm²) / 14 AWG
Tightening torque11.5 lbf.in (1.3 N.m), 11.5 lb.in L1/R, L2/S, L3/T); 5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES)
SupplyInternal supply 24 V DC 21…27 V), <200 mA overload and short-circuit protection; Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection
Analogue input number2
Analogue input typeVIA switch-configurable current 0...20 mA 242 Ohm 11 bits; VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits; VIB configurable PTC probe 0...6 probes 1500 Ohm; VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits
Sampling durationF 2 ms +/- 0.5 ms discrete; R 2 ms +/- 0.5 ms discrete; RES 2 ms +/- 0.5 ms discrete; VIA 2 ms +/- 0.5 ms analog; VIB 2 ms +/- 0.5 ms analog
Response timeFLA, FLC 7 ms +/- 0.5 ms discrete; FLB, FLC 7 ms +/- 0.5 ms discrete; FM 2 ms +/- 0.5 ms analog; RY, RC 7 ms +/- 0.5 ms discrete
Accuracy+/- 1 % FM) for a temperature variation 60 °C; +/- 0.6 % VIA) for a temperature variation 60 °C; +/- 0.6 % VIB) for a temperature variation 60 °C
Linearity errorFM +/- 0.2 % output; VIA +/- 0.15 % of maximum value input; VIB +/- 0.15 % of maximum value input
Analogue output number1
Analogue output typeFM switch-configurable current 0...20 mA 500 Ohm 10 bits; FM switch-configurable voltage 0...10 V DC 470 Ohm 10 bits
Discrete output number2
Discrete output typeConfigurable relay logic FLA, FLC) NO - 100000 cycles; Configurable relay logic FLB, FLC) NC - 100000 cycles; Configurable relay logic RY, RC) NO - 100000 cycles
Minimum switching current3 mA 24 V DC configurable relay logic
Maximum switching current2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R); 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R); 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R); 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R)
Discrete input typeF programmable 24 V DC level 1 PLC 3500 Ohm; R programmable 24 V DC level 1 PLC 3500 Ohm; RES programmable 24 V DC level 1 PLC 3500 Ohm
Discrete input logicNegative logic (sink) F, R, RES), >= 16 V, = 11 V
Acceleration and deceleration rampsAutomatic based on the load; Linear adjustable separately from 0.01 to 3200 s
Braking to standstillBy DC injection
Protection typeAgainst input phase loss drive; Break on the control circuit drive; Input phase breaks drive; Line supply overvoltage and undervoltage drive; Line supply undervoltage drive; Overcurrent between output phases and earth drive; Overheating protection drive; Overvoltages on the DC bus drive; Short-circuit between motor phases drive; Thermal power stage drive; Motor phase break motor; Thermal protection motor; With PTC probes motor; Against exceeding limit speed drive
Insulation resistance>= 1 mOhm 500 V DC for 1 minute
Frequency resolutionAnalog input 0.024/50 Hz; Display unit 0.1 Hz
Connector Type1 RJ45
Physical interface2-wire RS 485
Transmission frameRTU
Transmission Rate9600 bps or 19200 bps
Data format8 bits, 1 stop, odd even or no configurable parity
Number of addresses1…247
Communication ServiceWrite multiple registers (16) 2 words maximum; Read device identification (43); Read holding registers (03) 2 words maximum; Write single register (06); Monitoring inhibitable; Time out setting from 0.1 to 100 s
MarkingCE
Operating positionVertical +/- 10 degree
Height7.2 in (184 mm)
Width5.6 in (142 mm)
Depth1.9 in (48 mm)
Net Weight7.39 lb(US) (3.35 kg)

Environment & Certifications

Noise level51 dB 86/188/EEC
Dielectric strength3535 V DC between earth and power terminals; 5092 V DC between control and power terminals
Electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
StandardsIEC 61800-3 environments 2 category C2; EN 61800-3 environments 1 category C2; IEC 61800-3 category C3; IEC 61800-3; EN 61800-3 environments 2 category C3; EN 61800-3 category C3; EN 55011 class A group 1; EN 61800-3 environments 2 category C2; IEC 61800-3 environments 1 category C3; IEC 61800-3 environments 2 category C1; EN 61800-5-1; EN 61800-3; IEC 61800-3 environments 1 category C1; IEC 61800-3 environments 1 category C2; IEC 61800-5-1; EN 61800-3 environments 2 category C1; UL Type 1; EN 61800-3 environments 1 category C1; IEC 61800-3 environments 2 category C3; EN 61800-3 category C2; EN 61800-3 environments 1 category C3; IEC 61800-3 category C2
Product CertificationsNOM 117; CSA; C-tick; UL
Vibration resistance1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8; 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6
Shock resistance15 gn 11 ms IEC 60068-2-27
Pollution degree3 IEC 61800-5-1
Environmental characteristicClasses 3C1 conforming to IEC 60721-3-3; Classes 3S2 conforming to IEC 60721-3-3
Relative humidity5…95 % without condensation IEC 60068-2-3; 5…95 % without dripping water IEC 60068-2-3
Ambient air temperature for operation14…104 °F (-10…40 °C) (without derating); 104…122 °F (40…50 °C) (with derating factor)
Ambient Air Temperature for Storage-13…158 °F (-25…70 °C)
Operating altitude<= 6561.68 ft (2000 m); 3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network

Packaging & Logistics

Nbr. of units in pkg.1
GTIN00785901434832
Country of originID

Warranty

Warranty (in months)18
اطلب عرض سعر

يتناسب جيدًا مع

تسليم موثوق للمنتجات الصناعية في جميع أنحاء العالم.

تجربة خالية من المخاطر لمدة 90 يومًا

ضمان لمدة سنتين

شحن وإرجاع مجانيان

الأسئلة الشائعة

يرجى قراءة صفحة الأسئلة الشائعة لمعرفة المزيد.

هل تقومون بتوريد منتجات أصلية؟

نحن نوفر منتجات الأتمتة الصناعية والكهربائية الأصلية من الشركات المصنعة الرائدة بما في ذلك سيمنز (Siemens) وإيه بي بي (ABB) وشنايدر إليكتريك (Schneider Electric) وفينكس كونتاكت (Phoenix Contact) وإيتون (Eaton). أصالة المنتجات وجودتها هي أولويتنا.

هل يمكنني طلب عرض أسعار؟

نعم. إذا لم يتم عرض الأسعار أو كنت بحاجة إلى عناصر متعددة، فما عليك سوى استخدام زر "طلب عرض أسعار" أو الاتصال بفريق المبيعات لدينا للحصول على عرض أسعار مخصص.

هل تشحنون دوليًا؟

نعم. نحن نوفر خدمة الشحن إلى جميع أنحاء العالم، ويمكننا توصيل المنتجات إلى العملاء في جميع أنحاء أوروبا والشرق الأوسط وآسيا ووجهات دولية أخرى.

هل يمكنك توفير قطع غيار قديمة أو يصعب العثور عليها؟

نعم. نحن متخصصون في توريد مكونات الأتمتة الصناعية التي توقف إنتاجها أو عفا عليها الزمن أو يصعب العثور عليها من خلال شبكة الموردين العالمية لدينا.

ما هي الصناعات التي تخدمونها؟

نحن ندعم العملاء في قطاعات الصناعة والنفط والغاز والطاقة والمرافق ومعالجة المياه والبنية التحتية والأتمتة الصناعية.

ألم تجد إجابتك؟

لا تتردد في الاتصال بنا
تواصل معنا