ATH230D15M3
Schneider Electric variable speed drive, Altivar HVAC ATH200, ATH230, 15kW, 20hp, 200 to 240V, 3 phase, IP20.
Show Specifications
Main Characteristics
| Range of Product | Altivar HVAC ATH200 |
|---|---|
| Product Specific Application | HVAC |
| Product or Component Type | Variable speed drive |
| Variant | Standard version |
| Product destination | Asynchronous motors; Synchronous motors |
| Mounting Mode | Cabinet mount |
| IP Degree of Protection | IP20 |
| Phase | 3 phase |
| [Us] rated supply voltage | 200...240 V - 15...10 % |
| Relative symmetric mains voltage tolerance | 10 % |
| Supply frequency | 50...60 Hz - 5...5 % |
| Relative symmetric network frequency tolerance | 5 % |
| Nominal output current | 66.0 A |
| Maximum transient current | 72.6 A |
| Motor power kW | 15 kW |
| Maximum Horse Power Rating | 20 hp |
| Safety Function | STO (safe torque off) |
| Safety level | SIL 3 IEC 61508; PL = e ISO 13849-1 |
| EMC filter | Without EMC filter |
| Communication port protocol | Modbus serial; BACnet MS/TP |
| Option card | Communication module BACnet IP |
Technical Data
| Apparent power | 27.9 kVA at 240 V |
|---|---|
| Power dissipation in W | 551 W |
| Discrete input number | 7 |
| Discrete input type | STO safe torque off, 24 V DC1.5 kOhm; DI1...DI6 logic inputs, 24 V DC 30 V); DI5 programmable as pulse input 0…30 kHz, 24 V DC 30 V) |
| Discrete input logic | Positive logic (source); Negative logic (sink) |
| [Us] rated supply voltage | 24 V DC |
| Discrete output number | 1 |
| Discrete output type | Open collector DQ+ 0…1 kHz 30 V DC 100 mA; Open collector DQ- 0…1 kHz 30 V DC 100 mA |
| Analogue input number | 3 |
| Analogue input type | AI1 voltage 0...10 V DC 30 kOhm 10 bits; AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits; AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits |
| Analogue output number | 1 |
| Analogue output type | Software-configurable current AQ1 0...20 mA 800 Ohm 10 bits; Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits |
| Relay output number | 2 |
| Relay output type | Configurable relay logic R1A 1 NO 100000 cycles; Configurable relay logic R1B 1 NC 100000 cycles; Configurable relay logic R1C; Configurable relay logic R2A 1 NO 100000 cycles; Configurable relay logic R2C |
| Maximum switching current | Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC; Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC; Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC; Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 30 V DC; Relay output R2A, R2C resistive, cos phi = 1 5 A 250 V AC; Relay output R2A, R2C resistive, cos phi = 1 5 A 30 V DC |
| Minimum switching current | Relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC |
| Physical interface | 2-wire RS 485 |
| Connector Type | RJ45 |
| Method of access | Server Modbus serial; Subordinate BACnet MS/TP |
| Transmission Rate | 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps; 9.6, 19.2, 38.4, 76.8 kbit/s |
| Transmission frame | RTU; MS/TP |
| Number of addresses | 0…247; 0…127 |
| Data format | 8 bits, configurable odd, even or no parity 1or 2 stop |
| Type of polarization | No impedance |
| Line current | 79.7 A 200 V; 67.1 A 240 V |
| Prospective line Isc | 22 kA |
| Output frequency | 0.599 kHz |
| Output voltage | <= power supply voltage |
| Switching frequency | 2...16 kHz adjustable; 4...16 kHz with derating |
| Nominal switching frequency | 4 kHz |
| 4 quadrant operation possible | True |
| Asynchronous motor control profile | Voltage/frequency ratio, 5 points; Flux vector control with sensor, standard; Voltage/frequency ratio - Energy Saving, quadratic U/f; Flux vector control without sensor - Energy Saving; Voltage/frequency ratio, 2 points |
| Synchronous motor control profile | Vector control without sensor |
| Acceleration and deceleration ramps | Linear; U; S; CUS; Ramp switching; Acceleration/deceleration ramp adaptation; Acceleration/deceleration automatic stop with DC injection |
| Motor slip compensation | Automatic whatever the load; Adjustable 0...300 %; Not available in voltage/frequency ratio (2 or 5 points) |
| Braking to standstill | By DC injection |
| Brake chopper integrated | True |
| Standards | IEC 61800-5-1; IEC 61800-3; UL 508C; IEC 61800-3 environments 1 category C2; IEC 61800-3 environments 2 category C3; IEC 60721-3; IEC 61508; IEC 13849-1 |
| Product certifications | CULus; CE; UKCA; KC; EAC; ATEX; RCM |
| Marking | CULus; CE; UKCA; KC; EAC; ATEX; RCM |
| With safety function Safe torque off (STO) | True |
| Protection type | Line supply phase loss drive; Motor phase loss motor; Line supply overvoltage and undervoltage drive; Overheating protection drive; Overload motor; With PTC probes motor; Short-circuit between motor phases drive; Overcurrent between output phases and earth drive |
| Width | 7.09 in (180 mm) |
| Height | 13.0 in (330 mm) |
| Depth | 7.8 in (198 mm) |
| Net Weight | 15.2 lb(US) (6.9 kg) |
| Function Available | Fire mode; Run permissive; PID controller; Additional PID; Damper control; Underload detection for broken belt |
Environment & Certifications
| Pollution degree | 2 |
|---|---|
| Operating altitude | <= 3280.84 ft (1000 m) without derating; 3280.84...9842.52 ft (1000...3000 m) with current derating 1 % per 100 m |
| Operating position | Vertical +/- 10 degree |
| Electromagnetic compatibility | Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S2 according to IEC 60721-3-3 |
| Maximum acceleration under shock impact (during operation) | 150 m/s² at 11 ms |
| Maximum acceleration under vibrational stress (during operation) | 10 m/s² at 13...200 Hz |
| Relative humidity | 5…95 % without condensation or dripping water EN/IEC 60068-2-3 |
| Volume of cooling air | 41211.6 Gal/hr(US) (156 m3/h) |
| Overvoltage category | III |
| Noise level | 58 dB |
| Ambient air transport temperature | -13…158 °F (-25…70 °C) |
| Ambient air temperature for operation | 14…122 °F (-10…50 °C) without derating; 122…140 °F (50…60 °C) with derating factor |
| Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) |
Packaging & Logistics
| Nbr. of units in pkg. | 1 |
|---|---|
| Package 1 Height | 8.9 in (22.5 cm) |
| Package 1 Width | 10.1 in (25.7 cm) |
| Package 1 Length | 16.5 in (42 cm) |
| Package weight(Lbs) | 17.965 lb(US) (8.149 kg) |
| Number of Units in Package 2 | 6 |
| Package 2 Height | 29.5 in (75 cm) |
| Package 2 Width | 23.6 in (60 cm) |
| Package 2 Length | 31.5 in (80 cm) |
| Package 2 Weight | 136.453 lb(US) (61.894 kg) |
| GTIN | 3606487882411 |
| Country of origin | ID |
Warranty
| Warranty (in months) | 18 |
|---|
Pairs well with
Worldwide delivery, dispatched from Erbil
Technical support before and after you order
Genuine parts from authorised manufacturers
Obsolete and hard-to-find items sourced
ATH230D15M3
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping
We ship worldwide from our warehouse in Erbil, Iraq, and deliver across Baghdad and all governorates. Stocked lines dispatch quickly; items sourced to order have their lead time confirmed in writing with your quote.
-
Technical support
Not sure which part you need, or whether an alternative is compatible? Send us the part number, the equipment it goes into, or a photo of the nameplate and our team will confirm the correct item before you order.
WhatsApp +964 781 287 9696 or sales@alnajahpower.com.
-
Pricing and quotes
Prices are not shown online because they depend on quantity, specification and current availability. Add the items you need to your quote list and send it — we reply within one business day with pricing and lead time.
-
Contact us
Alnajah Power
Makhmur Str. 83, Erbil 44020, IraqPhone / WhatsApp: +964 781 287 9696
sales@alnajahpower.comSaturday to Thursday, 09:00 – 18:00.
FAQs
Please read our FAQs page to find out more.
Do you supply genuine products?
We supply genuine industrial automation and electrical products from leading manufacturers including Siemens, ABB, Schneider Electric, Phoenix Contact, and Eaton. Product authenticity and quality are our priority.
Can I request a quotation?
Yes. If pricing is not displayed or you require multiple items, simply use the “Request a Quote” button or contact our sales team for a customized quotation.
Do you ship internationally?
Yes. We provide worldwide shipping and can deliver products to customers across Europe, the Middle East, Asia, and other international destinations.
Can you source obsolete or hard-to-find parts?
Yes. We specialize in sourcing discontinued, obsolete, and difficult-to-find industrial automation components through our global supplier network.
What industries do you serve?
We support customers in manufacturing, oil & gas, energy, utilities, water treatment, infrastructure, and industrial automation sectors.