
ATS430C48S6
Schneider Electric Soft starter, Altivar Soft Starter ATS430, 480A, 208 to 600V AC, control supply 110 to 230V AC.
Show Specifications
Main Characteristics
| Range of Product | Altivar Soft Starter ATS430 |
|---|---|
| Product or Component Type | Soft starter |
| Product destination | Asynchronous motors |
| Product Specific Application | Standard industrial machines |
| Phase | 3 phase |
| Utilisation category | AC-3A; AC-53a |
| Ue power supply voltage | 208...600 V AC - 15...10 %) |
| Power supply frequency | 50...60 Hz - 20...20 % |
| [Ie] rated operational current | Normal duty 480 A in line 104 °F (40 °C)) |
| Service factor at Ie | 100 |
| Torque control | True |
| IP Degree of Protection | IP00 |
| Motor power kW | 132 kW 230 V in line normal duty; 250 kW 400 V in line normal duty; 250 kW 440 V in line normal duty; 315 kW 500 V in line normal duty; 315 kW 525 V in line normal duty |
| Maximum Horse Power Rating | 150 hp 208 V normal duty; 350 hp 460 V normal duty; 400 hp 575 V normal duty |
| Communication Port Protocol | Modbus serial |
Technical Data
| Device connection | In line |
|---|---|
| Overload current | 400 % Ie for 13 s |
| On-load factor | 50 % |
| Operating cycles/hour | 10 cyc/h |
| [Us] control circuit voltage | 110...230 V AC 50-60 Hz - 15...10 % |
| Apparent power | 70 VA |
| Integrated motor overload protection | True |
| Motor thermal protection class | Class 10E |
| Protection type | Phase failure mains; Thermal protection mains; Thermal protection starter; Current overload motor; Motor underload motor; Excessive acceleration time motor; Motor phase loss detection motor; Protection against line phase inversion mains; External thermal protection motor; Short-circuit between motor phase and earth motor |
| Current limiting %In (5 x Ie maximum) | 150…700 % |
| [In] Rated current pwr loss specifctn | 480 A |
| Power loss static current independent | 19 W |
| Power loss per device current dependent | 81 W |
| Power loss during starting | 4551 W during starting at 40 °C at 400% In |
| Standards | EN/IEC 60947-4-2; UL 60947-4-2; IEC 60664-1 |
| Product Certifications | cULus; CE; UKCA; CCC; RCM; EAC; KC |
| Marking | CULus; CE; UKCA; CCC; RCM; EAC; KC |
| [Uc] control circuit voltage | 24 V DC |
| Discrete input number | 4 |
| Discrete input type | STOP) digital input, 4.4 kOhm; RUN) digital input, 4.4 kOhm; DI3) digital input, 4.4 kOhm; DI4) digital input, 4.4 kOhm |
| Input compatibility | STOP digital input level 1 PLC EN/IEC 61131-2; RUN digital input level 1 PLC EN/IEC 61131-2; DI3 digital input level 1 PLC EN/IEC 61131-2; DI4 digital input level 1 PLC EN/IEC 61131-2 |
| Discrete input logic | Digital input STOP 0... 11 V, >= 5 mA; Digital input RUN 0... 11 V, >= 5 mA; Digital input DI3 0... 11 V, >= 5 mA; Digital input DI4 0... 11 V, >= 5 mA |
| Relay output number | 2 |
| Relay output type | Relay outputs R1A, R1C NO; Relay outputs R1B, R1C NC; Relay outputs R2A, R2C NO |
| Minimum switching current | 100 mA 12 V DC relay outputs |
| Maximum switching current | Relay outputs 2 A / 250 V AC for AC-15 100000 cycles following IEC 60947-5-1; Relay outputs 2 A / 30 V DC for DC-13 150000 cycles following IEC 60947-5-1 |
| Analogue input number | 1 |
| Analogue input type | PTC1 : PTC temperature probe; PTC2 : PTC temperature probe |
| Analogue output number | 1 |
| Analogue output type | Current output AQ1 : 0...20 mA/4...20 mA , impedance 470 Ohm |
| Communication port protocol | Modbus serial RJ45; Modbus serial open style (DO, D1, PE, COM) |
| Connector Type | 1 RJ45; Open style |
| Physical interface | 2-wire RS 485 RJ45; 2-wire RS 485 open style (DO, D1, PE, COM) |
| Transmission frame | RTU : 1 RJ45; RTU : open style (DO, D1, PE, COM) |
| Transmission rate | 4.8…38.4 kbps for Modbus serial RJ45; 0.3...115.2 kbps for Modbus serial open style (DO, D1, PE, COM) |
| Data format | 8 bits, odd, even or no parity, 1 or 2 bits to stop for Modbus serial RJ45; 8 bits, configurable odd, even or no parity for Modbus serial open style (DO, D1, PE, COM) |
| Number of addresses | 0…247 Modbus serial |
| Method of access | Slave Modbus serial |
| Type of polarization | No impedance Modbus serial |
| Display screen available | True |
| Operating position | Vertical +/- 10 degree |
| Height | 17.9 in (455 mm) |
| Width | 12.0 in (304 mm) |
| Depth | 11.7 in (296.5 mm) |
| Net Weight | 54.01 lb(US) (24.50 kg) |
| Internal bypass | True |
| Function Available | Single direction; Pre-heating; Power monitoring; Condition monitoring; User management; Ports and services hardening; Security event logging; Cybersecure firmware update; Small motor test |
| Material declaration | True |
Environment & Certifications
| Electromagnetic compatibility | Conducted and radiated emissions level A conforming to IEC 60947-4-2; Electrostatic discharge level 3 conforming to IEC 61000-4-2; Immunity to radiated radio-electrical interference level 3 conforming to IEC 61000-4-3; Immunity to electrical transients level 4 conforming to IEC 61000-4-4; Voltage/current impulse level 3 conforming to IEC 61000-4-5; Damped oscillating waves level 3 conforming to IEC 61000-4-18; Immunity to conducted disturbances radio-frequency level 3 conforming to IEC 61000-4-6 |
|---|---|
| Pollution degree | Level 3 |
| [Uimp] rated impulse withstand voltage | 6 kV |
| [Ui] Rated Insulation Voltage | 600 V |
| Environmental class (during operation) | Class 3C3 according to IEC 60721-3-3; Class 3S3 according to IEC 60721-3-3 |
| Ambient air temperature for operation | -13…104 °F (-25…40 °C) (without derating); 104…140 °F (40…60 °C) (with current derating of 1 % per °C above 40 °C) |
| Ambient Air Temperature for Storage | -40…158 °F (-40…70 °C) |
| Ambient air transport temperature | -40…158 °F (-40…70 °C) |
| Operating altitude | 2000...4800 m with current derating 1 % per 100 m above 2000 m |
| Relative humidity | 5…95 % without condensation or dripping water EN/IEC 60068-2-3 |
| Maximum deflection under vibratory load (during operation) | 1.5 mm at 2...13 Hz |
| Maximum deflection under vibratory load (during storage) | 1.75 mm at 2...9 Hz |
| Maximum deflection under vibratory load (during transport) | 1.75 mm at 2...9 Hz |
| Maximum acceleration under vibrational stress (during operation) | 1 gn at 13…200 Hz |
| Maximum acceleration under vibratory load (during storage) | 1 gn at 9…200 Hz; 1.5 gn at 200…500 Hz |
| Maximum acceleration under vibratory load (during transport) | 1 gn at 9…200 Hz; 1.5 gn at 200…500 Hz |
| Maximum acceleration under shock impact (during operation) | 15 gn at 11 ms |
| Maximum acceleration under shock load (during storage) | 10 gn at 11 ms |
| Maximum acceleration under shock load (during transport) | 10 gn at 11 ms |
Packaging & Logistics
| Nbr. of units in pkg. | 1 |
|---|---|
| Package 1 Height | 20.866 in (53.000 cm) |
| Package 1 Width | 15.748 in (40.000 cm) |
| Package 1 Length | 23.661 in (60.100 cm) |
| Package weight(Lbs) | 73.855 lb(US) (33.500 kg) |
| GTIN | 3606486948736 |
| Country of origin | CN |
Warranty
| Warranty (in months) | 18 |
|---|
Pairs well with
Worldwide delivery, dispatched from Erbil
Technical support before and after you order
Genuine parts from authorised manufacturers
Obsolete and hard-to-find items sourced

ATS430C48S6
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping
We ship worldwide from our warehouse in Erbil, Iraq, and deliver across Baghdad and all governorates. Stocked lines dispatch quickly; items sourced to order have their lead time confirmed in writing with your quote.
-
Technical support
Not sure which part you need, or whether an alternative is compatible? Send us the part number, the equipment it goes into, or a photo of the nameplate and our team will confirm the correct item before you order.
WhatsApp +964 781 287 9696 or sales@alnajahpower.com.
-
Pricing and quotes
Prices are not shown online because they depend on quantity, specification and current availability. Add the items you need to your quote list and send it — we reply within one business day with pricing and lead time.
-
Contact us
Alnajah Power
Makhmur Str. 83, Erbil 44020, IraqPhone / WhatsApp: +964 781 287 9696
sales@alnajahpower.comSaturday to Thursday, 09:00 – 18:00.
FAQs
Please read our FAQs page to find out more.
Do you supply genuine products?
We supply genuine industrial automation and electrical products from leading manufacturers including Siemens, ABB, Schneider Electric, Phoenix Contact, and Eaton. Product authenticity and quality are our priority.
Can I request a quotation?
Yes. If pricing is not displayed or you require multiple items, simply use the “Request a Quote” button or contact our sales team for a customized quotation.
Do you ship internationally?
Yes. We provide worldwide shipping and can deliver products to customers across Europe, the Middle East, Asia, and other international destinations.
Can you source obsolete or hard-to-find parts?
Yes. We specialize in sourcing discontinued, obsolete, and difficult-to-find industrial automation components through our global supplier network.
What industries do you serve?
We support customers in manufacturing, oil & gas, energy, utilities, water treatment, infrastructure, and industrial automation sectors.