ATV21HD18N4
Schneider Electric Altivar 21 variable speed drive, ATV21, 18.5kW 25HP, 480V, EMC filter class A, IP20.
Show Specifications
Main Characteristics
| Lifecycle status | Discontinued by the manufacturer |
|---|---|
| Range of Product | Altivar 21 |
| Product or Component Type | Variable speed drive |
| Product destination | Asynchronous motors |
| Product Specific Application | Pumps and fans in HVAC |
| Assembly style | With heat sink |
| Component name | ATV21 |
| EMC filter | Class A EMC filter integrated |
| Power supply voltage | 380...480 V - 15...10 % |
| Phase | 3 phase |
| Motor power kW | 18.5 kW |
| Maximum Horse Power Rating | 25 hp |
| Line current | 27.8 A 480 V; 34.8 A 380 V |
| Speed range | 1…10 |
| Transient overtorque | 120 % of nominal motor torque +/- 10 % 60 s |
| Asynchronous motor control profile | Constant voltage/frequency ratio with automatic IR compensation; Quadratic voltage/frequency ratio; Current flux vector control (FVC) without speed feedback; Energy saving ratio; Constant voltage/frequency ratio |
| Communication Port Protocol | Modbus |
| Type of polarization | No impedance |
| IP degree of protection | IP20 on upper part without blanking plate on cover EN/IEC 60529; IP20 on upper part without blanking plate on cover EN/IEC 61800-5-1; IP21 EN/IEC 60529; IP21 EN/IEC 61800-5-1; IP41 on upper part EN/IEC 60529; IP41 on upper part EN/IEC 61800-5-1 |
| Option card | Communication card APOGEE FLN; Communication card BACnet; Communication card LonWorks; Communication card METASYS N2 |
Technical Data
| Power supply voltage limits | 323…528 V |
|---|---|
| Power supply frequency | 50...60 Hz - 5...5 % |
| Power supply frequency limits | 47.5…63 Hz |
| Apparent power | 28.2 kVA 380 V |
| Maximum prospective line Isc | 22 kA |
| Maximum continuous output current | 37 A 380 V; 37 A 460 V |
| Maximum transient current | 40.7 A 60 s |
| Speed drive output frequency | 0.5…200 Hz |
| Nominal switching frequency | 8 kHz |
| Switching frequency | 6...16 kHz adjustable; 8...16 kHz with derating factor |
| Speed accuracy | +/- 10 % of nominal slip 0.2 Tn to Tn |
| Torque accuracy | +/- 15 % |
| Regulation loop | Adjustable PI regulator |
| Motor slip compensation | Not available in voltage/frequency ratio motor control; Adjustable; Automatic whatever the load |
| Diagnostic | 1 LED (red) for DC bus energized |
| Output voltage | <= power supply voltage |
| Insulation | Electrical between power and control |
| Recommended type of cable for mounting in an enclosure | With UL Type 1 kit 3 UL 508 cable 104 °F (40 °C), copper 75 °C / PVC; Without mounting kit 1 IEC cable 113 °F (45 °C), copper 70 °C / PVC; Without mounting kit 1 IEC cable 113 °F (45 °C), copper 90 °C / XLPE/EPR |
| Electrical connection | VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES terminal 0.004 in² (2.5 mm²) / 14 AWG; L1/R, L2/S, L3/T terminal 0.04 in² (25 mm²) / 3 AWG |
| Tightening torque | 5.3 lbf.in (0.6 N.m) VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES); 39.8 lbf.in (4.5 N.m), 40 lb.in L1/R, L2/S, L3/T) |
| Supply | Internal supply 24 V DC 21…27 V), <200 mA overload and short-circuit protection; Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection |
| Analogue input number | 2 |
| Analogue input type | VIA switch-configurable current 0...20 mA 242 Ohm 11 bits; VIA switch-configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits; VIB configurable PTC probe 0...6 probes 1500 Ohm; VIB configurable voltage 0...10 V DC 24 V max 30000 Ohm 11 bits |
| Sampling duration | F 2 ms +/- 0.5 ms discrete; R 2 ms +/- 0.5 ms discrete; RES 2 ms +/- 0.5 ms discrete; VIA 2 ms +/- 0.5 ms analog; VIB 2 ms +/- 0.5 ms analog |
| Response time | FLA, FLC 7 ms +/- 0.5 ms discrete; FLB, FLC 7 ms +/- 0.5 ms discrete; FM 2 ms +/- 0.5 ms analog; RY, RC 7 ms +/- 0.5 ms discrete |
| Accuracy | +/- 1 % FM) for a temperature variation 60 °C; +/- 0.6 % VIA) for a temperature variation 60 °C; +/- 0.6 % VIB) for a temperature variation 60 °C |
| Linearity error | FM +/- 0.2 % output; VIA +/- 0.15 % of maximum value input; VIB +/- 0.15 % of maximum value input |
| Analogue output number | 1 |
| Analogue output type | FM switch-configurable current 0...20 mA 500 Ohm 10 bits; FM switch-configurable voltage 0...10 V DC 470 Ohm 10 bits |
| Discrete output number | 2 |
| Discrete output type | Configurable relay logic FLA, FLC) NO - 100000 cycles; Configurable relay logic FLB, FLC) NC - 100000 cycles; Configurable relay logic RY, RC) NO - 100000 cycles |
| Minimum switching current | 3 mA 24 V DC configurable relay logic |
| Maximum switching current | 2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R); 2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R); 5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R); 5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R) |
| Discrete input type | F programmable 24 V DC level 1 PLC 3500 Ohm; R programmable 24 V DC level 1 PLC 3500 Ohm; RES programmable 24 V DC level 1 PLC 3500 Ohm |
| Discrete input logic | Negative logic (sink) F, R, RES), >= 16 V, = 11 V |
| Acceleration and deceleration ramps | Automatic based on the load; Linear adjustable separately from 0.01 to 3200 s |
| Braking to standstill | By DC injection |
| Protection type | Against input phase loss drive; Break on the control circuit drive; Input phase breaks drive; Line supply overvoltage and undervoltage drive; Line supply undervoltage drive; Overcurrent between output phases and earth drive; Overheating protection drive; Overvoltages on the DC bus drive; Short-circuit between motor phases drive; Thermal power stage drive; Motor phase break motor; Thermal protection motor; With PTC probes motor; Against exceeding limit speed drive |
| Insulation resistance | >= 1 mOhm 500 V DC for 1 minute |
| Frequency resolution | Analog input 0.024/50 Hz; Display unit 0.1 Hz |
| Connector Type | 1 RJ45 |
| Physical interface | 2-wire RS 485 |
| Transmission frame | RTU |
| Transmission Rate | 9600 bps or 19200 bps |
| Data format | 8 bits, 1 stop, odd even or no configurable parity |
| Number of addresses | 1…247 |
| Communication Service | Read device identification (43); Time out setting from 0.1 to 100 s; Monitoring inhibitable; Write multiple registers (16) 2 words maximum; Read holding registers (03) 2 words maximum; Write single register (06) |
| Marking | CE |
| Operating position | Vertical +/- 10 degree |
| Height | 13.0 in (329.5 mm) |
| Width | 9.6 in (245 mm) |
| Depth | 7.5 in (190 mm) |
| Net Weight | 25.68 lb(US) (11.65 kg) |
Environment & Certifications
| Noise level | 54 dB 86/188/EEC |
|---|---|
| Dielectric strength | 3535 V DC between earth and power terminals; 5092 V DC between control and power terminals |
| Electromagnetic compatibility | 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5; Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6; Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4; Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2; Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3; Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 |
| Standards | IEC 61800-3 environments 1 category C3; IEC 61800-3; IEC 61800-3 environments 1 category C1; UL Type 1; IEC 61800-3 environments 1 category C2; EN 61800-3 category C3; IEC 61800-3 environments 2 category C3; EN 61800-3 environments 1 category C2; EN 55011 class A group 1; EN 61800-3 environments 2 category C1; EN 61800-3; EN 61800-5-1; IEC 61800-3 category C2; IEC 61800-3 environments 2 category C2; IEC 61800-3 category C3; EN 61800-3 category C2; IEC 61800-5-1; IEC 61800-3 environments 2 category C1; EN 61800-3 environments 1 category C1; EN 61800-3 environments 1 category C3; EN 61800-3 environments 2 category C2; EN 61800-3 environments 2 category C3 |
| Product Certifications | NOM 117; UL; CSA; C-tick |
| Vibration resistance | 1 gn (f= 13…200 Hz) conforming to EN/IEC 60068-2-8; 1.5 mm (f= 3…13 Hz) conforming to EN/IEC 60068-2-6 |
| Shock resistance | 15 gn 11 ms IEC 60068-2-27 |
| Pollution degree | 2 IEC 61800-5-1 |
| Environmental characteristic | Classes 3C1 conforming to IEC 60721-3-3; Classes 3S2 conforming to IEC 60721-3-3 |
| Relative humidity | 5…95 % without condensation IEC 60068-2-3; 5…95 % without dripping water IEC 60068-2-3 |
| Ambient air temperature for operation | 14…104 °F (-10…40 °C) (without derating); 104…122 °F (40…50 °C) (with derating factor) |
| Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) |
| Operating altitude | <= 6561.68 ft (2000 m); 3280.84...9842.52 ft (1000...3000 m) limited to 2000 m for the Corner Grounded distribution network |
Packaging & Logistics
| Nbr. of units in pkg. | 1 |
|---|---|
| GTIN | 00785901433583 |
| Country of origin | ID |
Warranty
| Warranty (in months) | 18 |
|---|
Pairs well with
Worldwide delivery, dispatched from Erbil
Technical support before and after you order
Genuine parts from authorised manufacturers
Obsolete and hard-to-find items sourced
ATV21HD18N4
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping
We ship worldwide from our warehouse in Erbil, Iraq, and deliver across Baghdad and all governorates. Stocked lines dispatch quickly; items sourced to order have their lead time confirmed in writing with your quote.
-
Technical support
Not sure which part you need, or whether an alternative is compatible? Send us the part number, the equipment it goes into, or a photo of the nameplate and our team will confirm the correct item before you order.
WhatsApp +964 781 287 9696 or sales@alnajahpower.com.
-
Pricing and quotes
Prices are not shown online because they depend on quantity, specification and current availability. Add the items you need to your quote list and send it — we reply within one business day with pricing and lead time.
-
Contact us
Alnajah Power
Makhmur Str. 83, Erbil 44020, IraqPhone / WhatsApp: +964 781 287 9696
sales@alnajahpower.comSaturday to Thursday, 09:00 – 18:00.
FAQs
Please read our FAQs page to find out more.
Do you supply genuine products?
We supply genuine industrial automation and electrical products from leading manufacturers including Siemens, ABB, Schneider Electric, Phoenix Contact, and Eaton. Product authenticity and quality are our priority.
Can I request a quotation?
Yes. If pricing is not displayed or you require multiple items, simply use the “Request a Quote” button or contact our sales team for a customized quotation.
Do you ship internationally?
Yes. We provide worldwide shipping and can deliver products to customers across Europe, the Middle East, Asia, and other international destinations.
Can you source obsolete or hard-to-find parts?
Yes. We specialize in sourcing discontinued, obsolete, and difficult-to-find industrial automation components through our global supplier network.
What industries do you serve?
We support customers in manufacturing, oil & gas, energy, utilities, water treatment, infrastructure, and industrial automation sectors.