TSXCAY22C
Schneider Electric motion control modules, for servomotors, 8 ms..10 s, 2 axes.
Show Specifications
Main Characteristics
| Lifecycle status | Discontinued by the manufacturer |
|---|---|
| Range of Product | Modicon Premium Automation platform |
| Product or Component Type | Motion control modules |
| Product Specific Application | For servo motors |
| Servo loop type | Proportional to overshoot compensation and gain switching 2 ms |
| Checks | Presence of voltage/sensor feedback counter input; Consistency of commands; Encoder coupling, servo drive present, emergency stop; Proper execution of movement; Sensor power supply; Validity of parameters |
Technical Data
| Speed profile path | Trapezoidal or parabolic |
|---|---|
| Resolution | = 0.5 position units per point |
| Length of axis | 256…32000000 P |
| Acquisition speed | >= 54000 points/mn; <= 270000 points/mn |
| Acceleration time | 8 ms...10 s |
| Operating Mode | Direct drive mode; FOLLOWER; Automatic; OFF; Manual |
| Type of axis | Following axis dynamic ratio; Limited axis; Infinite axis |
| Function of module | Cut on the fly; Servo drive offset correction |
| I/O modularity | 2 axes |
| Input compatibility | Incremental encoder 10...30 V totem pole; Incremental encoder 5 V DC RS422; With 2-wire/3-wire sensor (24 DC) auxiliary input; Absolute encoder parallel output ABE7CPA11; Absolute encoder SSI output 12...25 bits |
| Clock frequency | 200 kHz SSI absolute encoder |
| Incremental encoder frequency x1 | 500 kHz |
| Incremental encoder frequency x 4 | 1000 kHz in counting; 250 kHz in input |
| Power dissipation in W | 7.2…11.5 W |
| Input type | Current sink auxiliary input EN/IEC 1131 Type 2; Resistive servo drive control input EN/IEC 1131 Type 1; Resistive counter input |
| Input logic | Positive |
| Input voltage | 24 V 8 mA auxiliary input; 24 V 8 mA servo drive control input; 5 V 18 mA counter input |
| Input voltage limits | <= 5.5 V counter input; 19...30 V auxiliary input; 19...30 V servo drive control input |
| Voltage state 1 guaranteed | >= 11 V auxiliary input; >= 11 V servo drive control input; >= 2.4 V counter input |
| Current state 1 guaranteed | >= 3.5 mA servo drive control input); >= 3.7 mA counter input); >= 6 mA auxiliary input) |
| Voltage state 0 guaranteed | <= 1.2 V counter input; <= 5 V auxiliary input; <= 5 V servo drive control input |
| Current state 0 guaranteed | <= 1 mA counter input); <= 1.5 mA servo drive control input); <= 2 mA auxiliary input) |
| Input impedance | 270 Ohm counter input; 3000 Ohm auxiliary input; 3000 Ohm servo drive control input |
| Number of outputs | 2 reflex output static EN/IEC 61131; 2 analogue output static; 2 servo drive validation output relay |
| Analogue output range | +/- 10...24 V |
| Analogue output resolution | 13 bits + sign |
| LSB value | 1.25 mV analogue output |
| Output voltage | 24 V DC reflex output: ; 24 V DC servo drive validation output: |
| Output voltage limits | Reflex output 19...30 V; Servo drive validation output 5...30 V |
| Nominal output current | 0.5 A reflex output |
| Maximum output current | 1.5 mA analogue output; 200 mA servo drive validation output; 625 mA reflex output |
| Minimum load | 1 mA 1 V |
| Maximum voltage drop | <1 V at state on reflex output |
| Maximum leakage current | 0.3 mA reflex output |
| Switching time | < 5 ms for servo drive validation; < 500 µs for reflex output |
| Output compatibility | Positive logic DC inputs (resistance <= 15 kOhm) reflex |
| Short-circuit protection | Current limiter reflex output; Thermal tripping reflex output |
| Output overload protection | Current limiter reflex output; Thermal tripping reflex output |
| Output overvoltage protection | Zener diode between outputs and 24 DC reflex output |
| Reverse polarity protection | Reflex output reverse diode on supply |
| Local signalling | 1 LED (green) for module operating (RUN); 1 LED (red) for external fault (I/O); 1 LED (red) for internal fault, module failure (ERR); 2 LEDs (green) for axis diagnostics available |
| Electrical connection | 1 connector HE-10 20 pins for aux inputs, reflex output, for external sensor and preactuator power supply; 1 connector HE-10 20 pins for servo drive ctrl inputs + for ext power supply of servo drive inputs/outputs; 1 connector SUB-D 9 for an analogue output (speed reference); 2 connectors SUB-D 15 for an incremental or absolute encoder |
| Current consumption | 11...20 mA 24 V DC on 10/30 V absolute encoder module; 1100 mA 5 V DC; 15 mA 24 V DC |
| Module format | Standard |
| Net Weight | 1.06 lb(US) (0.48 kg) |
Environment & Certifications
| Protective treatment | TC; Conformal coating Humiseal 1A33 |
|---|---|
| Ambient Air Temperature for Operation | 32…140 °F (0…60 °C) |
| Ambient Air Temperature for Storage | -13…158 °F (-25…70 °C) |
| Relative Humidity | 5…95 % without condensation |
| Operating altitude | <= 6561.68 ft (2000 m) |
Packaging & Logistics
| Nbr. of units in pkg. | 1 |
|---|---|
| Package 1 Height | 2.4 in (6.0 cm) |
| Package 1 Width | 7.09 in (18.0 cm) |
| Package 1 Length | 10.2 in (26.0 cm) |
| Package weight(Lbs) | 22.4 oz (636.0 g) |
| Number of Units in Package 2 | 4 |
| Package 2 Height | 11.8 in (30 cm) |
| Package 2 Width | 11.8 in (30 cm) |
| Package 2 Length | 15.7 in (40 cm) |
| Package 2 Weight | 6.744 lb(US) (3.059 kg) |
| GTIN | 3595863959116 |
| Country of origin | FR |
Warranty
| Warranty (in months) | 18 |
|---|
Pairs well with
Worldwide delivery, dispatched from Erbil
Technical support before and after you order
Genuine parts from authorised manufacturers
Obsolete and hard-to-find items sourced
TSXCAY22C
If you have any questions, you are always welcome to contact us. We'll get back to you as soon as possible, within 24 hours on weekdays.
-
Shipping
We ship worldwide from our warehouse in Erbil, Iraq, and deliver across Baghdad and all governorates. Stocked lines dispatch quickly; items sourced to order have their lead time confirmed in writing with your quote.
-
Technical support
Not sure which part you need, or whether an alternative is compatible? Send us the part number, the equipment it goes into, or a photo of the nameplate and our team will confirm the correct item before you order.
WhatsApp +964 781 287 9696 or sales@alnajahpower.com.
-
Pricing and quotes
Prices are not shown online because they depend on quantity, specification and current availability. Add the items you need to your quote list and send it — we reply within one business day with pricing and lead time.
-
Contact us
Alnajah Power
Makhmur Str. 83, Erbil 44020, IraqPhone / WhatsApp: +964 781 287 9696
sales@alnajahpower.comSaturday to Thursday, 09:00 – 18:00.
FAQs
Please read our FAQs page to find out more.
Do you supply genuine products?
We supply genuine industrial automation and electrical products from leading manufacturers including Siemens, ABB, Schneider Electric, Phoenix Contact, and Eaton. Product authenticity and quality are our priority.
Can I request a quotation?
Yes. If pricing is not displayed or you require multiple items, simply use the “Request a Quote” button or contact our sales team for a customized quotation.
Do you ship internationally?
Yes. We provide worldwide shipping and can deliver products to customers across Europe, the Middle East, Asia, and other international destinations.
Can you source obsolete or hard-to-find parts?
Yes. We specialize in sourcing discontinued, obsolete, and difficult-to-find industrial automation components through our global supplier network.
What industries do you serve?
We support customers in manufacturing, oil & gas, energy, utilities, water treatment, infrastructure, and industrial automation sectors.